Ask the question you have about the Denon CEOL Piccolo here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other DenonCEOL Piccolo owners to provide you with a good answer. True, there are occasions when it feels as though the Denon is pulling its punches just a little, but that’s far preferable to over-aggression, something that’s common in hi-fi kit at this end of the market. Still, a little extra attack wouldn’t go amiss if Denon were to produce a Piccolo Mk 2. Denon CEOL Piccolo review: iPod connectivity. Denon CEOL Piccolo DRA-N5 Pdf User Manuals. View online or download Denon CEOL Piccolo DRA-N5 Owner's Manual, Specification. CEOL piccolo (DRA-N5 / SC-N5) CEOL piccolo (DRA-N5 / SC-N5) Enjoy.
Is the set being operated as described in the owner’s manual?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Check whether the power plug is correctly inserted into the power outlet.
“Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To disable “Auto-Standby”, set “Auto-Standby” on the menu to “Off”.
LED is flashing
The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center.
The clock is incorrect because the AC was temporarily switched off, etc. Check the network connection and adjust the clock.
Operations cannot be performed through the remote control unit
Batteries are worn out. Replace with new batteries.
Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
Remove any obstacle between this unit and the remote control unit.
Insert the batteries in the proper direction, checking the and marks.
The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not affect operations from the remote control unit of this unit.
Press the DIMMER button on the remote control to set any setting other than OFF.
No sound comes out
Check that input connectors and output connectors are not reversely connected.
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. Also, securely tighten speaker terminals. Check speaker terminals for looseness.
Check that a proper input source is selected.
Adjust the volume.
Cancel the mute mode.
Check that the correct input source is selected when audio is being input to this unit from an external device.
Check the digital audio output setting on the connected device. The initial settings may be off depending on the device.
Only 2-channel linear PCM can be input as the digital audio signal to the DIGITAL IN connector of this unit.
No sound is output from the speakers when headphones are connected.
![]() Desired sound does not come out
Press the SDB/TONE button on the remote control to adjust the balance.
“Super Dynamic Bass”, “Bass” and “Treble” setting values are not reflected in subwoofer out.
Sound is interrupted or noise occurs
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
The network communication speed is slow or the radio station is busy.
When making a call, keep a distance of 20 cm or longer between iPhone and this unit.
If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN connection.
Particularly when you play back large music files, depending on your wireless LAN environment, the playback sound may be interrupted. In this case, make the wired LAN connection.
When using iPod by connecting it to the USB port, some iPod variations are not supported.
When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB cable.
This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to the same LAN as this unit.
The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to the latest version.
Apc back-ups es 400 user manual. The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on iTunes / iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume level.
The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon on the iTunes / iPhone / iPod touch / iPad screen and select this unit.
Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using AirPlay.
Some external factors may be affecting the wireless connection. Modify the network environment by taking measures such as shortening the distance from the wireless LAN access point.
The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device.
USB memory devices of a mass storage class or those compatible with MTP are supported.
This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port.
The USB memory device must be formatted to FAT16 or FAT32.
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized. When using a type of portable hard disc drive compatible with the USB connection that requires power from an AC adapter, use the AC adapter that came with the drive.
Files of a type not supported by this unit are not displayed.
This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in total. Modify the folder structure of the USB memory device.
When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be played on this unit.
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function.
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
Turn the power of the Bluetooth device off and on again, and then try again.
Cancel the Lock function on each Bluetooth device.
Check the NFC position on each Bluetooth device, and then move the NFC close to on this unit.
Set “Network Control” to “On” and connect again.
Remove obstructions between the Bluetooth device and this unit.
To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN devices and other Bluetooth devices.
File names on the iPod/USB memory device are not displayed properly
Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.” (period).
The LAN cable is not properly connected, or the network is disconnected. Check the connection status.
Hip2p ip camera cms user manual. The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can be played back in this unit are MP3, WMA and AAC.
The firewall function is enabled on the router. Check the firewall setting.
To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the DHCP setting to “On” on this unit.
To obtain the IP address manually, set the IP address and proxy on this unit.
Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a while and select the same radio station, or select another radio station.
Radio station is not currently in service. Register radio stations in service. Download finale manual 25.
The selected radio station is not in service. Select a radio station in service.
Files are stored in a non-compatible format. Record in a compatible format.
You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be played on this unit.
The set’s USB port cannot be used for connection to a computer.
Media sharing settings are not correct. Change media sharing settings so that the unit can access the folders on your computer.
The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall settings.
Computer’s power is not turned on. Turn on the power.
Set’s IP address is wrong. Check the set’s IP address.
Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC to this unit through the network.
Files of a type not supported by this unit are not displayed.
If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS setting.
If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows Media Player’s media sharing function and add NAS to the selected play folder.
If connection is restricted, set audio equipment as the connection target.
The network name and password (WEP, etc.) settings are wrong. Configure the network settings according to the setting details of this unit.
Reduce the distance between the wireless LAN access point and this unit, remove any obstructions and make sure the view to the access point is unobstructed before trying to connect again. Also, install microwave ovens and other network access points as far away as possible.
This unit supports IEEE802.11.b/g/n.
Configure the access point channel settings away from channels that are being used by other networks.
Check that the WPS mode of the router is operating.
Press and hold the Wi-Fi CONNECT/WPS button on this unit for approx. 3 seconds within 2 minutes of operating the router.
A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to “None”, “WPA-PSK (AES)” or “WPA2-PSK (AES)”.
If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the Wi-Fi CONNECT/WPS button. In this case, use the “Auto-Scan” or “Manual” method to connect.
Update the iPhone/iPod touch/iPad firmware to the latest version.
When using a USB cable to configure the settings, the iOS device firmware version needs to support iOS 5 or later. When configuring the settings via a wireless connection, iOS 7 or later needs to be supported.
Audio
Audio Streamer
Battery
Blu-ray Player
Bluetooth speaker
Camcorder
Car Satellite TV System
Car Stereo System
Car Video System
Carbon Monoxide Alarm
Cassette Player
CD Player
CD-player
Computer Drive
Cradle
DJ Equipment
DJ Gear
DVD Player
Earphone
Engraver
Headphone
Headphone amplifier
Headphones
Hi-Fi system
Home cinema set
Home Theater System
IP Phone
Media Player
MP3 Docking Station
MP3 Player
Music Mixer
Musical Instrument
![]() Network Card
Network Hardware
Oven
Planer
Portable DVD Player
Portable Multimedia Player
Radio
Receiver
Refrigerator
Satellite TV System
Saw
Soldering machine
Soundbar
Speaker
Speaker Dock
Speaker SystemDenon Ceol Piccolo Dra-n5 User Manual Guide
Stereo AmplifierDenon Ceol Piccolo Dra-n5 User Manual 2017
Denon Ceol Piccolo Dra-n5 SpecsStereo Equalizer
Stereo Receiver
Stereo System
Denon Ceol Piccolo Dra-n5 Resetshow all Stereo System Denon user manualsSurge Protector
Telephone Accessories
Turntable
Denon Ceol Piccolo Dra-n4TV Cables
TV Video Accessories
Universal Remote
Video Gaming Accessories
Wifi repeater
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |